Integrate advanced technologies vehicle power pcb

Payment Type: L/C,T/T,D/P,Money Gram,Western Union
Incoterm: FOB,CFR,CIF,EXW,FCA,CPT,CIP
Min. Order: 1 Piece/Pieces
Delivery Time: 8 Days

Basic Info

Model No.: CW-197

Structure: Double-Sided Rigid PCB

Dielectric: FR-4

Application: Consumer Electronics

Flame Retardant Properties: V0

Additional Info

Transportation: Ocean,Land,Air

Place of Origin:  China

Supply Ability: 10000sqm/month

Certificate: ISO9001, ISO14001, UL, IATF16949

Product Description

Pure electric vehicles (BEVs) are vehicles that use a single battery as a power source for energy storage. It uses the battery as a power source for energy storage. The battery provides electric energy to the motor through the battery to drive the motor to run, thereby driving the car. Rechargeable batteries for pure electric vehicles are mainly lead-acid batteries, nickel-cadmium batteries, nickel-metal hydride batteries, and lithium-ion batteries. These batteries can provide pure electric vehicle power. At the same time, pure electric vehicles also store energy through batteries, drive motors, and allow vehicles to run normally.

New energy industry develop very fast during the past years and also in the future as the government promotes the application of new energy sources, especially new energy vehicles. Affected by environmental protection pressure, the problem of traditional automobile exhaust pollution has been paid more and more attention. The main source of power for new energy vehicles is electric energy. Compared with traditional fossil fuel vehicles, electric vehicles have the advantages of zero emissions, zero pollution and high energy conversion efficiency.


   certification logo

                                        Specifications: 


                                                        Material: FR4

                                                        Layer: 1L

                                                        Copper thickness: 1OZ

                                                        Board thickness: 1.2mm

                                                        Surface Finishing: LF HASL

                                                        Solder mask color: Green

                                                        Silkscreen color: None  

                                                        Describe: For new energy industry                

1 2 1oz 1l Lf Hasl New Energy1 2 1oz 1l Lf Hasl New Energy Board_________________________________________________________________________________________________


Printed circuit boards abbreviation as PCB. A conductive pattern which is formed on a dielectric material in a predetermined design to form a printed circuit, a printed component, or a combination of the two is generally referred to as a printed circuit. And a conductive pattern that provides electrical connection between components on an insulating substrate, called printed circuits.



PCB characteristics
● High density. For decades, the high density of printed boards has grown with the increased integration of integrated circuits and advances in mounting technology.
● High reliability. Through a series of inspections, tests and aging tests, the PCB can be reliably operated for a long period of time (usually 20 years).
● Designability. For the various performances of PCB (electrical, physical, chemical, mechanical, etc.), the design of printed boards can be realized through design standardization and standardization, with short time and high efficiency.
● Productivity. With modern management, it can carry out standardization, scale (quantity), automation and other production to ensure product quality consistency.
● Testability. Established relatively complete test methods, test standards, various test equipment and instruments to detect and identify PCB product qualification and service life.

● Assemblyability. PCB products not only facilitate the standardized assembly of various components, but also can be automated, large-scale mass production. At the same time, the PCB and various component assembly components can be assembled to form larger components and systems up to the complete machine.

● Maintainability. Since PCB products and various component assembly components are produced in a standardized design and scale, these components are also standardized. Therefore, once the system fails, it can be replaced quickly, conveniently and flexibly, and the system can be quickly restored. Of course, you can say more about it. Such as miniaturization and weight reduction of the system, high-speed signal transmission, etc.

____________________________________________________________________________________

                                       ChuangYing Electronics
                      FOUR Advantages Quality with promise
            More than 15 years Team Pursuit of first-class quality


1, About the factory--More than 15 years industry experience: Self-built factory, 15 years of focus on circuit board manufacturing.

☆ Flip Aluminium PCB: The share of Aluminum industry more than 45%, service and quality have won the praise of customers.

☆ Advanced equipment: PVC plating line, CNC V-CUT machine,  Dongtai high speed drilling machine, high speed flying probe testing machine,  microscope, copper foil tensile tester, ion pollution degree detector.


2, Top technical team - fast delivery, professional service

50 professional and technical people with more than 10 years of PCB experience have rich experience in various industry standards and process quality requirements.

☆ Provide after-sales technical support, quickly respond to bad feedback, solve customer's difficult problems 


3, Certifications - UL, IO9001:2015, ISO14001:2015, IATF16949

All products undergo strict SGS testing and meet ROHS requirements

Implement TQM quality management and 6σ management mode,   continuous improvement, good rate 99%

Quality control seniors are skilled in IATF16949, QS9000 requirements,and have their internal auditor qualification certificate


4.Work with well-known companies - trustworthy PCB manufacturers

Over the years, has business contacts with many well-known companies such as BYD, Huawei, Schneider, and Siemens etc., and has maintained long-term supply relationships with these industry benchmarking companies.

The products are exported to Europe, America, Japan, Middle East, Philippines and other overseas markets, and are well received and trusted by customers.

Contact Information

CONTACT US

Chuangying Electronics Co.,Ltd

Contact Person: Gracie Cai

Phone:86-755-29493085

Fax:

Address: No.15 Gonghe Chuangye road, Xixiang Street,Shenzhen,Guangdong

Full name Contact Phone Content
点击刷新验证码